viper 3203, avital 4111, xk531
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128882
Printed Date: May 15, 2025 at 9:36 PM
Topic: viper 3203, avital 4111, xk531
Posted By: threehourshower
Subject: viper 3203, avital 4111, xk531
Date Posted: October 16, 2011 at 6:54 PM
I have a 2000 Jeep Grand Cherokee that I want to install a two-way system into. The cheapest way to do so (at least component wise) was to combine a Viper 3203, Avital 4111, and xk531 transponder bypass (which I have two factory RFID keys to program as well). When I started looking at directions that came with these items, it looked just a little more complicated than anticipated. So I looked at professional installation and thats quite more expensive than Im willing to pay given my abilities. I am familiar with small-component electrical repair on radios and wiring schematics, etc. are not foreign to me. I have installed my own stereo system and LED lighting in my vehicle on my own already so this really shouldnt be a problem for me. i plan on using secured wire taps rather than cut and solder though, as I dont want to risk harming my beloved Jeep. So this is the greatest forum for me to find help, as I understand it. Can I get an assembly of the wiring diagrams and specific instructions I'll need for this?
Replies:
Posted By: threehourshower
Date Posted: October 17, 2011 at 11:14 AM
gonna have to bump, was really looking forward to start cranking this installation this morning..
Posted By: threehourshower
Date Posted: October 17, 2011 at 4:46 PM
really? nobody has anything for me? I am at a loss as how to successfully combine these three systems. procedure, wiring tips, mount locations, anything helps at least a little bit..
|