starter kill
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128943
Printed Date: July 15, 2025 at 12:45 PM
Topic: starter kill
Posted By: fireman4
Subject: starter kill
Date Posted: October 23, 2011 at 9:31 AM
hey guys ok im looking into putting a starter kill in my girlfriends car its a 2003 ford focus and it has a compustar CM600-S remote starter in it. and i have a SONGLE realy thats N/O 40A and N/C 30A. wire colors are pin 87 yellow pin 87a red pin 85 is black pin 30 is blue and pin 86 is white. now how would i go by wiring that up? thanks
Replies:
Posted By: howie ll
Date Posted: October 23, 2011 at 10:36 AM
Cut the grey/black starter wire, switch side to 87a, motor side to 30,
armed out (WA), black from C/star to 85 and white from C/star (ign +) to 86. 87 not used unless it's the starter output from the C/star. This is all explained on the install instructions.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: fireman4
Date Posted: October 23, 2011 at 12:12 PM
So do I keep the white wire hooked up to the ign. Or do I cut it a put it to the relay also what about the starter wire coming from the compustar
Posted By: howie ll
Date Posted: October 23, 2011 at 2:03 PM
Don't you have an install guide? It's fully explained or there should be one in the Downloads/Manuals section on this site.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|