2005 pontiac sunfire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128967
Printed Date: July 17, 2025 at 12:36 PM
Topic: 2005 pontiac sunfire
Posted By: gtxpro
Subject: 2005 pontiac sunfire
Date Posted: October 25, 2011 at 9:27 PM
Hi, my question is kind of odd and newbie but i hope someone can clear my mind on it.
I have a 2005 sunfire (Base edition, no power doorlock).
I began with my first alarm which i bought on ebay (terrible but the whole remote start relay setup is installed) the car couldnt stay on so i took a Astroflex Series 1000 J5F and the remote start work, but it doesn't have an alarm (also the antenna is terrible).
So i was thinking to buy something decent, something like a python 1601 (alarm/remote start/unlock,lock) for around 120 bucks. but i was wondering what kind of actuators would fit in that thing?
Of course I mean what kind of actuator it need, 2 wires or 5 wires? or is it controlling it with the car computer?
-------------
mangez dla marde
Replies:
Posted By: blanx218
Date Posted: October 25, 2011 at 9:32 PM
just about any 2 wire actuators will be fine. and you can find them usually less than $10 each. You'll need 2 standard 30 amp 5pin relays as well. There is a diagram on how to wire up the relays for them on this site.
|