avital rs python 702
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128995
Printed Date: July 05, 2025 at 5:03 PM
Topic: avital rs python 702
Posted By: will757
Subject: avital rs python 702
Date Posted: October 28, 2011 at 7:31 PM
ok so ive had my avital stand alone RS for right around a year now and .....com had python 702's on sale so i got one. almost everything works fine but i remember there was something about the yellow ign wire that i cant put myh finger on. when i remote start the car the alarm goes off. do i connect the yellow wires from both systems? the python was refurbished so no book and i couldnt find it online so i used the manual for a 323 but it got dark and started raining on me.
Replies:
Posted By: blanx218
Date Posted: October 28, 2011 at 10:52 PM
Did you connect the yellow ign wire from the 702 to the ignition wire in the car? If so disconnect it and connect it to the yellow wire from the remote starts secondary harness.
Posted By: will757
Date Posted: October 29, 2011 at 9:14 AM
done but same thing. by secondary harness you do mean the one with gnd and 12v correct? its setting the on board shock sensor off
|