2001 taurus transponder

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129013
Printed Date: April 29, 2024 at 2:45 PM

Topic: 2001 taurus transponder

Posted By: maxcat
Subject: 2001 taurus transponder
Date Posted: October 30, 2011 at 1:59 PM

Hi there, can anyone verify the wire colors of this vehicles tx and rx wires. It looks like you can either go right to the transponder connector at the ignition switch or down the column about 8 inches to another white connector. do the colors change between these 2 connectors.

I have quite a bit of conflicting paperwork on these connections, just looking to get some clarification.

Thank-you in advance

Replies:

Posted By: kreg357
Date Posted: October 30, 2011 at 2:30 PM

According to ADS, the TX should be BROWN / Orange at Pin 4 and the RX should be RED / Black at Pin 3. I have noticed that the
colors do change sometimes at that connector that is about 8 inches down the steering column.

-------------
Soldering is fun!

Posted By: maxcat
Date Posted: October 30, 2011 at 3:58 PM

Thanks for the reply kreg357, I guess I will just take a look when I get the vehicle. Like I said I have found different colors noted between Autostart, Idata link, and Fortin, but I think some of that info is different because of the location they are getting the connection at.

Thanks again for the reply

Print Page | Close Window