viper 5901 status led solid on
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129036
Printed Date: May 23, 2024 at 3:46 AM
Topic: viper 5901 status led solid on
Posted By: gtdan01
Subject: viper 5901 status led solid on
Date Posted: November 01, 2011 at 12:27 AM
Anybody have this issue with the status led on the control center being solid on no matter what? Begining to think there is something wrong with the control center.
Replies:
Posted By: i am an idiot
Date Posted: November 01, 2011 at 3:51 AM
I have no idea if the Viper units do this as well, but some units use this to tell you that the alarm is in Valet Mode.
Posted By: howie ll
Date Posted: November 01, 2011 at 5:21 AM
Agreed, check your owner's manual.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: Mike M2
Date Posted: November 01, 2011 at 6:25 AM
The old ones were open door, press lock/unlock/lock on the remote.....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: smokeman1
Date Posted: November 01, 2011 at 6:34 AM
Try pressing the F button twice and then press the UNLOCK button. As Mr Idiot stated, it is probably in Valet Mode.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: gtdan01
Date Posted: November 01, 2011 at 2:01 PM
I will try it. Seems like everything works correctly otherwise.
Posted By: gtdan01
Date Posted: November 01, 2011 at 2:12 PM
Well just tried it on the lcd 2 way paging remote. It had the lock colored in and the blanked out to just an outline when I switched it over saying it was in valet everytime you unlock or lock. So it definitely was not in valet, I had tried this before via the control center button to make sure it wasn't in valet.
|