2000 323i bmw
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129047
Printed Date: May 22, 2024 at 8:48 PM
Topic: 2000 323i bmw
Posted By: triniforever
Subject: 2000 323i bmw
Date Posted: November 01, 2011 at 7:33 PM
Hey guys i recently did a remote start an keyless entry on this car with viper 5101 ,the customer is telling me that whenever he locks an unlocks the car with the viper remote the car wont start with the key.I used a spare key in a box to remote start,any ideas? .................................thanks ------------- triniforever
Replies:
Posted By: thecoolmankyle7
Date Posted: November 02, 2011 at 1:47 AM
Do you have it doing a double pulse on the unlock so it will disarm the factory alarm?
Posted By: howie ll
Date Posted: November 02, 2011 at 2:22 AM
I'm guessing the key in the box was a regular key incorporating keyless entry.
Change it for the grey VALET key.
The regular key "still talks" to the immobiliser system.
I'm assuming you used a 556UW without the loop Euro-style as per the instructions.
Double pulse is new to me on that vehicle (E46) never come across it.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: November 02, 2011 at 2:26 AM
You must also pick up lock and unlock (neg) from the WHITE/ black and blue/red in the driver kick, goes from door entry grommet to main vertical loom in far corner, extending the lock pulse will give you comfort (total) close.
Don't feed it from the button on the centre console.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: triniforever
Date Posted: November 02, 2011 at 4:32 AM
thanks for your reply guys,i picked up lock an unlock behind the glove box from the middle plug,and yes i did the 556uw with the euro style wiring,and the customer made a spare key BUT NOT GREY it was black,im gonna try to extend the lock pulse and see what happens,and since i got the lock and unlock wires behind the glove box is that ok?.......................thanks ------------- triniforever
Posted By: howie ll
Date Posted: November 02, 2011 at 4:38 AM
Yes but I tend to go under driver dash, everything including tach (on OBD) is under there, except on left hand drive trunk release and trunk trigger. In fact on right hand drive I don't even need to release the glove box.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: triniforever
Date Posted: November 02, 2011 at 5:39 AM
Thanks Howie ,im gonna try doing an extended pulse on the lock an hope that works.
-------------
triniforever
|