98 camry avital 4103 door locks not worki
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129064
Printed Date: May 05, 2024 at 10:41 AM
Topic: 98 camry avital 4103 door locks not worki
Posted By: rocco weiland
Subject: 98 camry avital 4103 door locks not worki
Date Posted: November 02, 2011 at 10:07 PM
I have installed a avital 4103 in a 98 camry and the door locks are not working. I have double even triple checked the wiring. I have also metered it, checked to make sure the + is not set on the avital. Do I have to do anything in programing? or is something I am missing? Any help would be great to stop pulling my hair out (at least what left).....
Replies:
Posted By: howie ll
Date Posted: November 03, 2011 at 1:39 AM
Two initial tests:
The wires you selected on the vehicle, have you grounded each to see if they work?
Have you tested your Avital outputs?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: November 03, 2011 at 1:50 AM
Avital green to dark blue/white.
Avital blue to dark blue.
Both on orange plug at fusebox.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: rocco weiland
Date Posted: November 06, 2011 at 7:27 PM
Sorry for the delay in getting back... I have tested the wires you have said to use I have the green wire hooked up to blue/white wire and when I ground it out it works, now the alarm will only work once awhile. I have tested grounding it out at the factory harness and the one at the alarm and it works every time. When I push the remote button it work once every 25-30 times. When I tested the blue wire I am getting -12 volt from that wire. I have not tried to ground it out in fear I will pop the fuse or something worst. Every thing else works fine. When you are programming the unit how to you choose option 1 from the remote. I know how to get in programming and get to the feature. It not clear on the feature option. I hit lock on the remote and unlock to select the option but I always get a 2 honks on the unlock?
|