compatibility bulldog rs112 and xk05, xk0

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129073
Printed Date: June 05, 2024 at 5:50 AM

Topic: compatibility bulldog rs112 and xk05, xk0

Posted By: wyciwug
Subject: compatibility bulldog rs112 and xk05, xk0
Date Posted: November 03, 2011 at 8:54 AM

03 Sequoia.

I was just wondering if Bulldog RS112 remote start and By passes Xk05 and Xk01 will be compatible to be installed together? Thanks

-------------
DCD

Replies:

Posted By: kreg357
Date Posted: November 03, 2011 at 9:19 AM

Should work well. Only the XK05 ( w/PKT2 firmware ) will need a GWR signal. The RS112 has the two required Ignition outputs. The FASD wire can be used for Keysense if the vehicle has the factory alarm. While the RS112 only has a positive parking light output, the Sequoia does have a (+) Parking Light wire.

-------------
Soldering is fun!

Print Page | Close Window