relay to disable starter, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129100
Printed Date: May 04, 2024 at 12:06 AM
Topic: relay to disable starter, remote start
Posted By: trae08
Subject: relay to disable starter, remote start
Date Posted: November 05, 2011 at 9:29 AM
I want to wire a relay up to disable the starter on my truck while it is under remote start. My remote starter has an acc 2 output wire with a 200ma ground output that im not using. So im thinking i could use that to do this. but im not sure how to wire it up. could someone help me out with this? a diagram or something would be great. Thanks.
Replies:
Posted By: chev104275
Date Posted: November 05, 2011 at 9:33 AM
What kind of car ? What kind of remote start ? If there is a status output on the system you can use that
Pin 85 to status output
Pin 86 to fused 12 volts
Pin 30 to one side of cut starter wire
Pin 87a to other side of cut wire
You need to put your starter output on the side you cut towards the car
-------------
If i Can't Install it I Don't need it Joe
Posted By: trae08
Date Posted: November 05, 2011 at 1:35 PM
1999 dodge ram 1500 2wd 5.9l
auto page C3-RS603
Posted By: trae08
Date Posted: November 05, 2011 at 2:03 PM
also im not sure what you mean by this
"You need to put your starter output on the side you cut towards the car"
Posted By: trae08
Date Posted: November 05, 2011 at 4:13 PM
nvm got it all wired up. thanks for your help.
|