2011 corolla le, immobilizer wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129107
Printed Date: May 15, 2025 at 5:33 AM
Topic: 2011 corolla le, immobilizer wiring
Posted By: bruc007
Subject: 2011 corolla le, immobilizer wiring
Date Posted: November 05, 2011 at 9:48 PM
Having trouble programming a new key overideall bypass from fortin
in this 2011 corolla le. It has the 80bit "g" key and imo connections under the hood. Remote works ok ( tried with key in ignition) however module wont program.Any suggestions
https://ifar.ca/en/download/2327/preview.html
Replies:
Posted By: Chris Luongo
Date Posted: November 06, 2011 at 3:44 AM
What firmware version is written on the module? Has to be 4.00 or higher.
What does the LED on the module do when you try to program?
Also, you have to start the car and let it run to program the module. Just turning the key to ignition won't do it.
Posted By: bruc007
Date Posted: November 06, 2011 at 8:58 AM
Version 4.01 module . I held program button in while plugging connector 2 first then connector 3 on the back and finally connector 1 -power .When led came on released button- light stays on
Insert key and turn ignition on
Start car and wait
Red light stays on solid -no flashes
Posted By: kreg357
Date Posted: November 06, 2011 at 5:15 PM
Posted By: jstruckman
Date Posted: November 06, 2011 at 8:36 PM
This is a stupid question but do you have 12vdc on the red wire. I am not familiar with this unit, but I know on DEI's unit the red button will light up just like this but will not program if you do not have 12vdc on the red wire. Just had this issue with a DEI DB-ALL two days ago. Thought i had power but didnt and it wouldnt program just like Fortin is with you. Just a thought.
-------------
|