viper responder one wont remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129246
Printed Date: May 11, 2025 at 6:03 PM
Topic: viper responder one wont remote start
Posted By: dcman41
Subject: viper responder one wont remote start
Date Posted: November 16, 2011 at 1:34 AM
Hi,
I hope some some one can help. My friend purchased a viper responder one, and i installed it for him in a 95 subaru legacy wagon. Install was a piece of cake took 45 minutes. The damn thing wont remote start. Red status LED on the brain does NOT light up ever. When i attempt to remote start it parking lights flash 5 times (hood pin shutdown) Which is weird because i dont even have it hooked up! So i tried hooking up the hood pin, still same issue.I also tried a new ground, and randomly tried the remote start and it worked great. Shut it down via brake pedal and tried to start it again, Nothing! Anyone have any idea what it could be ? Im 100% positive its not the wiring. Im pretty sure its just a bad brain seeing as it did come in a refurbished box. Any input is appreciated, thanks.
Replies:
Posted By: i am an idiot
Date Posted: November 16, 2011 at 3:34 AM
The remote start brain may be smarter than you think. It may know that you do not have a hood pin installed. You really need a hood pin.
Posted By: aurelius689
Date Posted: January 08, 2012 at 12:42 PM
did you hook up the nuetral safety wire, if your car doesn't have a nuetral safety switch you need to hook this wire up to ground?
Posted By: aurelius689
Date Posted: January 08, 2012 at 12:45 PM
...P.S. The five light flashes are because you held the transmitter button too long and put the remote starter into car finder mode...
|