prostart 3300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129269
Printed Date: May 10, 2025 at 4:50 AM

Topic: prostart 3300

Posted By: gallopgt
Subject: prostart 3300
Date Posted: November 17, 2011 at 7:47 PM

Hey I had a ProStart 3300 remote car starter installed in my car a number of years ago. It worked great, just recently lost the keys for it so I took the key from the bypass module.

I got a new key cut placed the old one back into the bypass module and it does not work anymore

When I try to reprogram it I'm not having any luck, when I try to "Flashing the hood pin" I'm not getting my parking lights to come on...

I've tried both flashing the hood pin and I've tried just using the PAB button "Programming Assistance Button" I can't get the car to enter program mode

The red light on the module is flashing constantly also

Thanks if anyone can help!

Replies:

Posted By: lspker
Date Posted: November 17, 2011 at 10:31 PM

Is the starter not functioning at all or not strting because of bypass?

Try grounding grey wire inside car, see if programs.

If not unplug brain, reset and reprogram.

Posted By: gallopgt
Date Posted: November 18, 2011 at 6:56 AM

lspker wrote:

Is the starter not functioning at all or not strting because of bypass?

Try grounding grey wire inside car, see if programs.

If not unplug brain, reset and reprogram.

The Starter is not working at all, this gray wire is the one that connected to the hood switch right?

Posted By: gallopgt
Date Posted: November 18, 2011 at 7:01 AM

I do have a new hood switch I'll try that also.

Posted By: muaiad97
Date Posted: November 19, 2011 at 12:38 PM

what car is it what make. key in the box u dont need any programming for the bypass madual.

Posted By: gallopgt
Date Posted: November 21, 2011 at 6:54 AM

the car is a 2000 Mercury Cougar, Yes I do have a key in the box..

I still have not had the time to try the new hood switch or gounding the gray wire...

Posted By: muaiad97
Date Posted: November 21, 2011 at 9:23 PM

now u will have to go under the dash to find the starter box and u will find plug with 5 wires connect the black with grey and u should see the park light on and the unit will be in program mode.after pushing the PAB