Print Page | Close Window

05 honda pilot and rs avital 4103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129274
Printed Date: May 13, 2025 at 9:51 PM


Topic: 05 honda pilot and rs avital 4103

Posted By: wyciwug
Subject: 05 honda pilot and rs avital 4103
Date Posted: November 18, 2011 at 8:20 AM

Hello

Would like to disarm the factory alarm during remote start but doors will be locked still.  Please help me with the wiring connections, thanks.



-------------
DCD



Replies:

Posted By: tonanzith
Date Posted: November 19, 2011 at 10:48 AM
It is a - BLACK/ re to BLACK/ blue wire at the door module in the driver door. Use the LIGHT GREEN/ BLACK factory alarm disarm output wire from the avital to power this wire. This is NOT the same BLACK/ red wire at the fuse box it MUST be grabbed at the driver door module in the door to disarm without unlocking the doors.

-------------
Gary Sather




Print Page | Close Window