Print Page | Close Window

xk01 with avital 4103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129281
Printed Date: July 17, 2025 at 5:59 PM


Topic: xk01 with avital 4103

Posted By: nojooms
Subject: xk01 with avital 4103
Date Posted: November 18, 2011 at 10:57 PM

I have xpresskit xk01 GMDL5X firmware and avital 4103 remote starter 0n 2006 chevy malibu.Trying to use D2D port which wires to connect beside d2d from 9 pin connector?.Is the data wire on the obd2 #1 green or #2 purple?.
the xk01 manual not too much help,thanks.



Replies:

Posted By: Twelvoltz
Date Posted: November 19, 2011 at 2:28 PM
Depending on the version of the 4103 you have, it may not work with D2D. There was/is a issue with the Avital units in D2D mode...it doesn't work right. I would strongly suggest W2W on that one.

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: nojooms
Date Posted: November 19, 2011 at 11:22 PM
its avistart 4103


Print Page | Close Window