2010 altima with evo all
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129308
Printed Date: May 10, 2024 at 1:07 PM
Topic: 2010 altima with evo all
Posted By: tbjoe
Subject: 2010 altima with evo all
Date Posted: November 20, 2011 at 3:44 PM
Hi, I am having issues getting the Evo-All to program. I am running Hardware version 4.00 and software 4.0 as well. I have triple checked my wiring and everything is good. I am stuck at step 5 of the programming where it tells you if all three LEDs don't light up solid, just keep repeating. Well, I have repeated it over 50 times and I still can't get it to take. What is this thing looking for? Anyone have any suggestions? I called tech support and followed their recommendations with no luck. I am doing the simplified installation.
Thanks,
Joe
Replies:
Posted By: Velocity Motors
Date Posted: November 20, 2011 at 4:54 PM
Check your wiring again and reprogram the module again. Remember to reset the module after every attempt
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|