reprogramming a remote, viper 160xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129397
Printed Date: April 29, 2024 at 4:31 AM

Topic: reprogramming a remote, viper 160xv

Posted By: eanderson651
Subject: reprogramming a remote, viper 160xv
Date Posted: November 26, 2011 at 12:44 PM

Hello all,

I am trying to program a replacement remote for a Viper 160XV for a friend.

However, when I look at the unit, the LED status light is missing as is the valet programming button (the blue 2 pin harness)

I assume you need those to program the new remote? The bitwriter is not able to program new remotes, only features correct? As I do have a bit writer....

Thanks all!

Replies:

Posted By: Mark Mizenko
Date Posted: November 27, 2011 at 6:38 PM

Yes, you need the pushbutton atleast.

Open door, turn ignition on, press then release button, then press and hold, then pree the lock button on the remote.

Release button, turn ignition off. Test remote

Print Page | Close Window