2006 equinox, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129400
Printed Date: May 04, 2024 at 5:23 PM

Topic: 2006 equinox, remote start

Posted By: mattb21
Subject: 2006 equinox, remote start
Date Posted: November 26, 2011 at 3:06 PM

Does anyone have access to the vehicle wiring diagram for a 2006 Chevy Equinox?

Also, what bypass do you guys recommend? Preferably something that doesn't need a bit writer to be programmed, or use an extra key -- if at all possible.

Replies:

Posted By: kreg357
Date Posted: November 26, 2011 at 3:31 PM

Here is a link to DEI for their wiring guide : https://www.readyremote.com/main.asp?make=Chevrolet&model=Equinox

Here is a link to Bulldog Security for their wiring guide : https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

The 2005 is the same as the 2006, so here is a link to the wiring info from the12volt : https://www.the12volt.com/installbay/forum_posts.asp~TID~66458

I have used the iDatalink ADS-ALSL GM bypass module on the Equinox with excellent results. No key left under the dash. Easy programming. Handles the bypass, locks and Factory Alarm, making the install very easy.

-------------
Soldering is fun!

Posted By: zerepdivad
Date Posted: November 27, 2011 at 12:22 AM

I'd recommend going the 2 relay and resistor method for bypass on that one.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.