2011 legacy outback immobilizer bypass?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129424
Printed Date: May 28, 2024 at 2:13 PM

Topic: 2011 legacy outback immobilizer bypass?

Posted By: dcman41
Subject: 2011 legacy outback immobilizer bypass?
Date Posted: November 28, 2011 at 11:48 AM

Hello, I need to do a remote start on a 2011 subauru legacy. I was wondering what the best immobilizer bypass to use is ? I usually use fortin for all bypasses, but they require me to go to the dealer to have the bypass programmed. I would rather not go to the dealer to have them do this. 1)I dont trust them, and 2) they would probably rape the customer. Are there any bypasses out there that doesnt require this ? Any help is appreciated.

Replies:

Posted By: kreg357
Date Posted: November 28, 2011 at 2:02 PM

Not much for Subies.

I believe the only non-"key in the box" or "Dealer Scan Tool" required bypass option is the Klon process from iDatalink. It requires the use of an ADS-AL CA module and a multi-step process to program. However, you must be an authorized / registered iDatalink dealer. Here is a link for more info : https://www.idatalink.com/klon

-------------
Soldering is fun!

Posted By: tedmond
Date Posted: November 29, 2011 at 11:23 PM

the idatalink is the only option, try to find a dealer that will flash it for you, thats your only choice. the other option is to buy the ads module, the ADS-USB and flash it yourself.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window