clifford matrix 20.7x manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129426
Printed Date: July 14, 2025 at 4:15 PM

Topic: clifford matrix 20.7x manual

Posted By: skaman11
Subject: clifford matrix 20.7x manual
Date Posted: November 28, 2011 at 12:31 PM

I need the installation Manuel for a clifford matrix 20.7x. All I have is the quick reference guide. I looked in the downloads sections and could not find it. Is their a viper install manual that is same I could use?

thanks

PS. Im installing it in 2004 camry, tips or FYI would be nice if anyone has input.

Replies:

Posted By: smokeman1
Date Posted: November 28, 2011 at 4:35 PM

You should be able to use the Viper 5301 install manual for the Clifford 20.7x. I looked at both of the install manuals I have on hand, and the wiring harness are the same. I believe the difference is the LCD remote, different antenna, and range.

Does your clifford have a 18 pin harness? If so, it is just a combination of three pins from older versions.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: skaman11
Date Posted: November 29, 2011 at 10:48 PM

Awesome, my RS does have the 18pin harness. So i assume that the programing is also identical? I have never installed a DEI product this new. I am use to the older ones that had the ribbon harness that went to the relay pack. This Clifford has some wires on the heavy gauge harness labeled as FLEX relay input/output, from my understanding they are only used if my car need an ignition isolation, how do I know if that is required on my 2004 Camry?

Print Page | Close Window