95 k1500 power lock autopage c3rs665 2w
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129433
Printed Date: July 15, 2025 at 2:57 PM
Topic: 95 k1500 power lock autopage c3rs665 2w
Posted By: aehaines
Subject: 95 k1500 power lock autopage c3rs665 2w
Date Posted: November 28, 2011 at 8:35 PM
Anybody have a wiring diagram for the power door locks with Goodwrench add-on keyless entry. I've checked all wiring and coming up with nothing on this one. I've got 5 pin Blue, blue/red, Orange (polarity), black, and BLACK/ red. The keyless entry module box has no info on it just says goodwrench and was ziptied under the dash It's a 95 Chevy K1500. The remote start and alarm are working but no power locks from the remote. They work from the door switches but still nothing from the remote. I've tested the leads from the autopage brain and I am getting a pulse just stumped and finding no 5 pin diagram on it.
Replies:
Posted By: smokeman1
Date Posted: November 29, 2011 at 6:55 AM
Which remote is not working? the one from the Goodwrench or the Autopage? Check the fuses on the keyless entry module. Looks to have two fuses.
https://www./itm/390342841429?rd=1&item=390342841429&viewitem=&sspagename=WDVW&category=33578&ih=026&vxp=mtr
Link to a E-Bay page with some photos, might help. ------------- When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: aehaines
Date Posted: November 30, 2011 at 8:30 AM
Traced everything back to cut wires to a factory relay. Evidently, the factory KE was swapped out at some point from a relayed system to a non-relay. This truck's wiring is a nightmare! I haven't found a wire yet that wasnt tapped, spliced, or in some other way molested. Tempted to buy a full harness and start from scratch...
|