avital remote with security problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129436
Printed Date: May 23, 2024 at 2:57 AM
Topic: avital remote with security problems
Posted By: doug.b
Subject: avital remote with security problems
Date Posted: November 28, 2011 at 10:34 PM
i installed a avital two way remote with security in a 2010 ford explorer when i remote start the truck with the doors locked the alarm will go off if i start it with doors unlocked no problem,also the remote doesn't have any range maybe 50 feet
any suggestions would be greatly appreciated thanks
-------------
doug.b
Replies:
Posted By: tedmond
Date Posted: December 01, 2011 at 8:26 AM
you will need to do 1 of 2 options
1) set your unit to unlock-start-relock. this disables factory alarm prior to starting to prevent faults.
2) open up the driver running board, look for YELLOW /GREEN(-) PURPLE / green(-) and diode isolate the 2. run a wire to your disarm. test with keypad.
also, it should disarm with igniton and valid transponder.
if your range sucks, check ground.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: December 01, 2011 at 8:43 AM
Also where is your antenna mounted, also if screen mounted does this vehicle have a tint or a heated front screen?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|