xk05 programming issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129468
Printed Date: July 13, 2025 at 6:23 PM
Topic: xk05 programming issues
Posted By: blanx218
Subject: xk05 programming issues
Date Posted: November 30, 2011 at 8:54 PM
Has anyone else had any issues with programming an XK05 to a Ford recently. I always do W2W and the only way I can get them to program is by leaving the brown GWR disconnected, follow all the steps til I activate the remote start and as I press the button I have to manually ground the GWR to get it to program. All issues have been with Avital 4103's. I used another XK05 on a Toyota with different programming tonight and it worked fine. Not sure if its an issue with the 4103 or the XK05. As usual, DEI wasnt very helpful.
Replies:
Posted By: tedmond
Date Posted: December 01, 2011 at 7:58 AM
I have used the xk05 and had the same issue for a 2011 sienna. i think its a programming bug for the xk05 itself. my bypass of choise is idatalink or fortin since they cover every vehicle out there. the xk05 was the only 80bit support i had on hand.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|