Print Page | Close Window

viper 5904 and 2003 acura tl

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129485
Printed Date: July 12, 2025 at 4:38 AM


Topic: viper 5904 and 2003 acura tl

Posted By: nima
Subject: viper 5904 and 2003 acura tl
Date Posted: December 01, 2011 at 8:50 PM

HI,

i am trying to install Viper 5904 stsyem to 2003 acura TL,

i need help with H3 harness, I need to connect 2nd accessory wire from viper

i dont know how to connect those wire (H3/2 RED / white),(H3/6 RED),(H3/7 Pink/White),(H3/8 Pink/Black) and (H3/9 RED / Black)




Replies:

Posted By: smokeman1
Date Posted: December 01, 2011 at 9:45 PM

The 2nd accessory will be the Vipers H3/7 Pink/White. The Viper will have this wire set as Ignition 2, so you will need to access the Menu 3, Item 8, Option 2.

The H3/2, H3/6, and H3/9 will need to be connected to a constant 12 volt source. Listed as white(+) on Bulldog Secruity site.

https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp



-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation


Print Page | Close Window