07 tacoma and xk05
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129506
Printed Date: May 17, 2024 at 1:30 PM
Topic: 07 tacoma and xk05
Posted By: ziggyb222
Subject: 07 tacoma and xk05
Date Posted: December 03, 2011 at 3:51 PM
Doing a 07 Tacoma with a XK05. It has the PkT2 version in it. Is this the version I should use? Xpresskit lists that as one that will work...Thanks for your help!!!!
Replies:
Posted By: Twelvoltz
Date Posted: December 03, 2011 at 3:57 PM
The PKT2 firmware on the XK05 is correct for an 07 Tacoma. It will do transponder bypass for remote start (since you didn't mention what it was you are 'doing' on the truck).
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: ziggyb222
Date Posted: December 03, 2011 at 4:55 PM
I am doing a Avital on this truck. Saw on Xpresskit there was another firmware PKT1 that als was listed.. On the PKT2 install sheet it lists the IMO and IMI data wires behind glove box in a black 36 pin plug lt/green and blue/white I could only find oneblack plug with those wires.. How would I test for the correct wires....Thanks again!!!!
Posted By: kreg357
Date Posted: December 03, 2011 at 7:06 PM
If you can re-flash with the PKTI firmware, it is an easier install. The wires are at the steering column and easy to find.
-------------
Soldering is fun!
|