Print Page | Close Window

2009 acura mdx brain location

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129516
Printed Date: May 16, 2024 at 8:26 AM


Topic: 2009 acura mdx brain location

Posted By: opelap
Subject: 2009 acura mdx brain location
Date Posted: December 04, 2011 at 10:16 AM

Looking at putting a Viper remote start into my wife's MDX.

Going to go with the DB-ALL interface. 

My main question is if the standard length of the Viper/Python antenna wire is long enough to put the unit in the center console where the factory remote start unit would go.  It will have to reach from the middle of the windshield, across to the A pillar, back across under the dash and into the center console.

Anybody do one of these before and is there a better place to put the main unit?




Replies:

Posted By: tedmond
Date Posted: December 04, 2011 at 8:56 PM
probably wont have enough antenna wire. and there is room under the dash to hide the brain.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: holmstj
Date Posted: December 05, 2011 at 8:34 PM
Just installed Viper this last weekend and yes, you do have enough wire to install to the center console just forward of the rear blower from the center window just right of mirror. However, the parking light wire will not be long enough to reach to the LH driver kickpanel location so a splice is needed. Installed DB-ALL with Viper 5501 purchase refurbished from factory for 109.00 Door locks work and get remote indication to work but cannot get the engine to rotate. Guess you get what you pay for. Double checking wire again this weekend.





Print Page | Close Window