viper 5301 in 1999 chevy silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129518
Printed Date: May 09, 2025 at 11:46 PM

Topic: viper 5301 in 1999 chevy silverado

Posted By: shongboy
Subject: viper 5301 in 1999 chevy silverado
Date Posted: December 04, 2011 at 2:04 PM

Hey guys i want to install a Viper 5301 in my 1999 Silverado. I'm going to use the Xpresskit DB-ALL bypass module and wire it D2D. I made a spreadsheet with the connections and where they go. Can you guys just look at it and see if i have everything right? I wanna make sure it is all correct before i start the install. Thanks

posted_image

Replies:

Posted By: smokeman1
Date Posted: December 04, 2011 at 2:57 PM

H3/1 to Pink,(Ing1),

H3/2, H3/5, & H3/8 to Red (12 volts +),

H3/4 to Yellow (starter),

H3/6 to White(Ing2),

H3/3 to Orange(Accessory)

H3/7 NC

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: shongboy
Date Posted: December 04, 2011 at 3:11 PM

Ok sweet thanks

Print Page | Close Window