Print Page | Close Window

first hybid 2011 prius

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129545
Printed Date: May 17, 2025 at 8:34 AM


Topic: first hybid 2011 prius

Posted By: qikgts
Subject: first hybid 2011 prius
Date Posted: December 05, 2011 at 3:41 PM

I've never had to do any install work on a hybrid before but the day has come!!! Sorry to sound silly but I just don't know what to expect. To top it off, I have a very limited amount of time to do the job in so I won't be able to figure it out for myself.

I need to do a gps with a starter kill on this Prius that has a push button start and I'm looking for feedback on what to do when I verify the ignition circuit and starter kill. 

With no key switch to turn what will I need to do? I have the DEI info on the vehicle but I don't know the sequence of events I need to go through to activate the circuits I'll be integrating with.

Will I need to just press the brake pedal and then press the "power/start" button and probe the listed wires to see the typical results?




Replies:

Posted By: ropuma
Date Posted: January 02, 2012 at 9:20 PM
Get a module from Fortin electronics(KEYOVERRIDE ALL) Installation is easy.


Print Page | Close Window