Print Page | Close Window

vats interfacing with bypass for 05 buick

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129563
Printed Date: June 07, 2024 at 11:50 PM


Topic: vats interfacing with bypass for 05 buick

Posted By: cshim
Subject: vats interfacing with bypass for 05 buick
Date Posted: December 06, 2011 at 8:54 PM

Hi, If someone can enlighten me, I would be forever thankful.

I have 2005 Buick Century and I've installed DBALL bypass unit. So far, I have everything wires with an exception of the R-Code wires. I don't know where to wire that in.

The wiring chart that came with, says to connect it to BCM purple plug pin A1(green), I don't know which one is A1, can you help me?

Is there pin layout naming convention or something like that? i've spent a while looking for one but unable to find one specific for my vehicle or a general case diagram.



Replies:

Posted By: cshim
Date Posted: December 06, 2011 at 9:00 PM
There are 3 green wires of the same gage and colour on the purple BCM plug fyi.



Posted By: cshim
Date Posted: December 06, 2011 at 11:33 PM
It's been resolved. I cross-referenced other wires in the same BCM plug to establish the pin layout.


Print Page | Close Window