2008 dodge charger cant find canbus wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129599
Printed Date: July 15, 2025 at 1:26 AM
Topic: 2008 dodge charger cant find canbus wires
Posted By: dcman41
Subject: 2008 dodge charger cant find canbus wires
Date Posted: December 08, 2011 at 7:42 PM
Hello,
Im currently working on a 2008 dodge charger. Im using a python 991 with xpress kitdb-all with the latest fw. However im having trouble find the canbus wires that are supposed to be located in the kick panel according to the xpress kit manual. Any help is greatly appreciated
Replies:
Posted By: Mike M2
Date Posted: December 08, 2011 at 8:26 PM
Can wires are ALWAYS available at the ODB2 connector under the dash on every car made. On yours i believe they are WHITE/ black high, WHITE/ blue low....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: dcman41
Date Posted: December 08, 2011 at 9:03 PM
Thanks, i found those two canbus wires, but this xpress kit db-all requires the use of the dual canbus. But anyway for any one else that is having issues with the wires not being in the "Kick Panel" The FTCAN High & FTCAN High Low, were WHITE/ orange and white. They were NOT twisted in the kick panel, but instead @ pins 24/25 on the top side of the big black connector thats located above the kick panel.
|