2012 focus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129646
Printed Date: May 04, 2024 at 12:47 AM

Topic: 2012 focus

Posted By: slicksam
Subject: 2012 focus
Date Posted: December 11, 2011 at 9:14 AM

Hi Guys,

First time installing a remote starter on a 2012 focus.

My question is How do you drop the glovebox?? I see 3 screws : 2 screws in the glovebox and 1 screw on the passenger side. But it won't come out.

P.S all screws removed are torx.

any help would be appreceiated.

thanks

-------------
Testing is the key

Replies:

Posted By: howie ll
Date Posted: December 11, 2011 at 9:22 AM

I seem to remember lower screws behind the lid.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: slicksam
Date Posted: December 11, 2011 at 10:29 AM

ok, finally got it off.

Since this car is standard, I need to wire up the driver doorpin. Its a ground when the door is closed and nothing when it is opened.

I can't remember how to wire this, so that the starter see's a door open and then close.

-------------
Testing is the key

Posted By: howie ll
Date Posted: December 11, 2011 at 10:38 AM

DEI 1021 and 1097, should be on this site.
I posted them about 2 weeks ago.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window