audiovox aps901c status out

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129822
Printed Date: May 23, 2024 at 2:42 AM

Topic: audiovox aps901c status out

Posted By: snaoum
Subject: audiovox aps901c status out
Date Posted: December 23, 2011 at 10:48 AM

Does the APS901C have a status out that I can use to trigger the rear defrost on a 09 Accord?

Replies:

Posted By: lectricguy
Date Posted: December 23, 2011 at 1:32 PM

The light blue Ignition 3 wire of the APS901C is the status out. If you are using this for a bypass GWR signal, then you will need to diode isolate. Using 2 diodes (such as 1N4001), wire the banded ends together forming a "Y". the common banded end is connected to the light blue ignition 3 output; the two non-banded ends of the "Y" form the 2 isolated signals-- one for bypass GWR and one for your defrost relay.

-------------
Lectric Guy

Posted By: tedmond
Date Posted: December 25, 2011 at 11:28 AM

brown (fuse box) green connector (-) 8min neg trigger latched

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window