viper remote lights keep breaking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129838
Printed Date: May 01, 2025 at 6:25 PM

Topic: viper remote lights keep breaking

Posted By: ffyter
Subject: viper remote lights keep breaking
Date Posted: December 24, 2011 at 1:28 PM

I have two 5701 vipers and both 2 way remote ghost lights have failed next to the lock button. Anyone know if the design of the Clifford remotes that will work with my 5701 is of better design? I was thinking of getting one off of eBay.

Replies:

Posted By: theghostman01
Date Posted: December 24, 2011 at 1:44 PM

can you send somes pictures posted_image

Iam just installing this remote-start alarm posted_image

Thank you and HAPPY CHRISTMAS posted_image

-------------
ThE GhOsTmAn01

Posted By: ffyter
Date Posted: December 24, 2011 at 1:52 PM

nothing to see really. The led is rubbed against when the lock button is pushed and the plastic top of the light pops off inside. You cannot see it from the outside of the case.

Posted By: howie ll
Date Posted: December 24, 2011 at 1:55 PM

Probably means a Mk ll design in 2012

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window