Print Page | Close Window

09 denali hatch release and liftgate

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129851
Printed Date: May 11, 2025 at 9:50 AM


Topic: 09 denali hatch release and liftgate

Posted By: jonyb
Subject: 09 denali hatch release and liftgate
Date Posted: December 25, 2011 at 9:06 PM

2009 Yukon Denali with power liftgate and separate hatch release
Clifford 50.7X
ADS-ALSL-GM
Wire to wire

I tied the RED / white (trunk release from the Clifford) to the RED / white (on ADS)
also connected the aux 2 from Clifford to the brown "tailgate window release".

When I activate auxiliary 1, both the liftgate goes up, and the hatch opens.

What gives?

Everything else works like a charm.



-------------
John Bauer
Pro Installz
Paducah, KY



Replies:

Posted By: i am an idiot
Date Posted: December 26, 2011 at 4:35 AM

AUdiovox says Pink Or Grey.  DId you possibly read that as Pink and Grey? 

Note reads:  PINK IS GLASS RELEASE, GRAY IS HATCH RELEASE




Posted By: jonyb
Date Posted: December 26, 2011 at 6:01 AM

Nevermind, I just realized that there are 2 wires for auxiliary 1 on the 50.7X. 



-------------
John Bauer
Pro Installz
Paducah, KY



Posted By: jonyb
Date Posted: January 02, 2012 at 10:42 PM
went back today and tried to fix it.  I thought I had both aux 1 wires connected to powerliftgate and hatch, but now there is only one wire connected, and the problem is still there.
 
2009 Yukon Denali
Clifford 5702X
AL-SLGM
Hardwired
RED / white (aux 1) from Clifford to RED / white (power liftgate) on ADS

Having a problem when I press the aux 1 function, the power liftgate and hatch both open at the same time. I originally had WHITE/ violet (Clifford) to Brown (ADS), but realized that the WHITE/ violet was a negative trigger for relays on aux 1. I went back and clipped that wire, and the problem is still there.

Any thoughts or suggestions?



-------------
John Bauer
Pro Installz
Paducah, KY




Print Page | Close Window