viper 5101 b4102v in mazda b2300
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129858
Printed Date: May 03, 2025 at 7:06 AM
Topic: viper 5101 b4102v in mazda b2300
Posted By: parallelkingdom
Subject: viper 5101 b4102v in mazda b2300
Date Posted: December 26, 2011 at 12:31 PM
hello, i'd like to try and install a viper 5101 (B4102V) into a mazda b2300. my truck has manual locks and windows. 2.3ltr 4 cylinder single cab 2 wheel drive. automatic trans.
i was wondering if there is a guide anywhere on the internet specifically stating which wires on my truck go to which wires on the alarm.
thank you for any info.
Replies:
Posted By: parallelkingdom
Date Posted: December 26, 2011 at 12:32 PM
pickup is a 1997 model as well.
Posted By: tedmond
Date Posted: December 27, 2011 at 10:07 AM
get the diagram for the vehicle and the unit, match them up for function, and go install. use a DMM to test though.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: offroadzj
Date Posted: December 27, 2011 at 10:49 AM
You can find the vehicle wire charts either on this side under the Vehicle Wiring section, or on readyremote.com. Always check every connection with a DMM to verify. Don't just assume the wire charts are correct.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|