central locking help!

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12986
Printed Date: September 08, 2025 at 7:06 AM

Topic: central locking help!

Posted By: mosameer
Subject: central locking help!
Date Posted: April 30, 2003 at 3:25 PM

I have successfully installed the alarm but cannot hook up the central locking...when i tried to use the door lock relay the central locking stopped wokring altogether even with the key!
The alarm installed is a magicar cm3000 module. And the car it is installed on is a 1994 honda civic 4door. Please can anyone help? do i need to go to an auto electrician?

Replies:

Posted By: draasch
Date Posted: April 30, 2003 at 5:08 PM

first check your fuses, you may blown one.

this the info i have for that car:
Power Lock GREEN / WHITE SWITCH OR DOORLOCK CONTROL
Power Unlock GREEN/ RED UNIT IN DRIVER DOOR #201

#201- See Negative Pulse Door Lock Diagram.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: mosameer
Date Posted: April 30, 2003 at 6:09 PM

fuses are perfect...its 01:10 am here at the moment in the uk so i will try the wires tmrw morning..thanks...btw could i have blown the solenoid/acutators on the door locks??

Posted By: draasch
Date Posted: April 30, 2003 at 9:40 PM

maybe but im not sure how or what you hooked up.you can always pull a door panel and check the wires.find the motor wires and make two jumpers. put one to 12v and the other to ground. the motor will operate one way and if you switch the wires around it go the other way. if it works then its not your motor.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: mosameer
Date Posted: May 01, 2003 at 6:26 PM

went to honda and they sorted the central locking out....but i still need to solve which wires to place where from the alarm door lock relay module to the car wiring...i have found the lock and unlock wires GREEN / WHITE and GREEN/ RED in the drivers kick panel...but there isnt any reading on my multimeter...should there be a reading coming from these wires? can anyone help me becuase EVERYTHING else works perfectly in the car and the alarm inc remote start! Thanks in advance!

Posted By: Velocity Motors
Date Posted: May 01, 2003 at 10:42 PM

The wires should have 12 volts on both and when you touch (-) to them the door is supposed to lock or unlock.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA