Print Page | Close Window

dei vs compustar d2d connection

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129882
Printed Date: May 05, 2025 at 11:17 AM


Topic: dei vs compustar d2d connection

Posted By: dman007
Subject: dei vs compustar d2d connection
Date Posted: December 27, 2011 at 11:35 AM

Are Compustar systems D2D connections compatible with DEI Startsmart D2D connections.

I want to hook up a Compustar 600-S(remote starter) to a dsm200(smart start add-On) using the D2D connection for ease of installation. Would this be possible?



-------------
DTS Performance
St Petersburg, FL



Replies:

Posted By: armbruster
Date Posted: December 27, 2011 at 6:13 PM

This DSM200 is compatible with all Directed Electronics Security, Remote Start and hybrid systems that are Bitwriter™ (3 or 4 pin) compatible. I do not think it will work w/the data port of a Compustar System.




Posted By: dman007
Date Posted: December 27, 2011 at 6:30 PM
You are correct I confirmed today that Dei and compustar D2D connections are not compatible. So any Dei system has to be w2w with fortin and idatalink bypasses.

-------------
DTS Performance
St Petersburg, FL



Posted By: kreg357
Date Posted: December 27, 2011 at 6:51 PM
Unless you flash the iDatalink bypass module with the DBI firmware ( instead of the ADS firmware ).  Example ADS AL(DL) CH4 firmware on the ADS AL-CA bypass for a CS600-S remote starter vs DBI AL(DL) CH4 for a Viper 5701 unit.

-------------
Soldering is fun!


Print Page | Close Window