viper 5701 plus pats gm2 plus 08 impala

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129886
Printed Date: May 10, 2025 at 7:44 AM

Topic: viper 5701 plus pats gm2 plus 08 impala

Posted By: jlnielsen07
Subject: viper 5701 plus pats gm2 plus 08 impala
Date Posted: December 27, 2011 at 12:23 PM

Looking for a wiring scheem for a viper 5701 with the Pats-gm2 bypass. When I'm in the colum the only wires are very small in the ingition something like a 22 gauge and the viper are more like 12 or 10 gauge. I can't see how this will work. Any help is appreciated thank you in advance

Jesse

Replies:

Posted By: jlnielsen07
Date Posted: December 27, 2011 at 12:56 PM

I have been told over and over that this is simply about a 9 wire install with the bypass. But which nine wires does a person use to go to the bypass? Spent two days on this with little to no luck.

Posted By: tedmond
Date Posted: December 27, 2011 at 2:06 PM

the 9 wire sounds about right. the system is multiplex, therefore the current draw is not significant. just use a wiring guide found under vehicle wiring, match up/connect. make sure you are testing with a dmm

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window