07 pilot disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129899
Printed Date: May 14, 2025 at 10:39 AM

Topic: 07 pilot disarm

Posted By: ziggyb222
Subject: 07 pilot disarm
Date Posted: December 28, 2011 at 4:11 AM

Looking for the best way to disarm the factory alarm for a remote start. Have seen some different wire colors and if you need to go into the door or not. This is a 07 Honda Pilot.. It does not have a key cylinder in the pass door... Thanks in advance for your help... Happy New Year!!!!!

Replies:

Posted By: metz35
Date Posted: December 28, 2011 at 5:11 AM

Blue - drivers door main switch
Or passenger kick. Since you have no keyhole in passenger door there is no wire
In the plug you would have to add one. I don't remember the pin number but it's in the large plug. Maybe some one else could chime in.

Posted By: mobileedgeny
Date Posted: December 28, 2011 at 5:12 AM

up behind glovebox there is a solid yellow wire. cut it and open with a relay. it will disarm and the factory remote key will work under remote start for a 1 button.

Posted By: tedmond
Date Posted: December 28, 2011 at 7:58 AM

mobileedgeny wrote:

up behind glovebox there is a solid yellow wire. cut it and open with a relay. it will disarm and the factory remote key will work under remote start for a 1 button.

this is only true for select honda vehicles 2000-2006 mainly accords.

the wire you are looking for is Pink/Black (-) behind glove box GREEN 7 Pin connector Pin 2(wire side)

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window