autostart 1414 hf

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129963
Printed Date: July 07, 2025 at 8:37 AM

Topic: autostart 1414 hf

Posted By: deuce1974
Subject: autostart 1414 hf
Date Posted: December 31, 2011 at 11:48 AM

I have this remote starter and need to program a new transmitter, old one has only one button left working on it. I went through all the steps in the manual but I can't seem to get the module into program mode by using the flash pin or the PAB. I hold the flash pin down for the 4-5 seconds and let it come up, then down again for a sec and up, but lights only stay on for about 3 seconds, tried programming in this time frame with 2 people, but no luck. Any help would be greatly appreciated.

Thanks

Replies:

Posted By: lspker
Date Posted: January 02, 2012 at 8:33 PM

brain probably locked up...........disconnect and reconnect and try to program... but first make sure your hood pin is grounding, sometimes on the second press it may not make good contact.

Posted By: deuce1974
Date Posted: January 03, 2012 at 6:47 AM

How do I disconnnect? Just pull the cords out of the back of it? I haven't much experience with these.

Thanks