python 991 in rsx remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129972
Printed Date: August 29, 2025 at 5:47 AM
Topic: python 991 in rsx remote start
Posted By: keanevann
Subject: python 991 in rsx remote start
Date Posted: December 31, 2011 at 9:52 PM
Hi everyone. I have a 2004 Acura RSX and i have installed a Python 991. Everything works except the remote start. I have the transponder bypass installed. This is what I have for wiring up the remote start wiring harness.
Python 991 RSX
Pink (Ign 1) BLACK / YELLOW
RED / Wht (Ign 2) Not Connected
Orange (ACC) WHITE/ Red
Violet (Starter Car Side)BLACK/ White (Car Side)
Green (Starter Key Side)BLACK/ White (Key SIde)
Red (Ign 1 Input) Not Connected
Pink/Wht(Ign 2) Not Connected
Pink/Bla(Flex Relay Input)Not Connected
RED / Bla (Acc/Starter Input) Not Connected
As I said before I know this is wrong because it doesn't start.Can someone help me out and please provide the correct connections. Thank you in advance.
Replies:
Posted By: keanevann
Date Posted: December 31, 2011 at 9:53 PM
All RSX's are the same wiring but if needed its a 2003 Acura RSX Auto Trans. Thanks.
Posted By: tedmond
Date Posted: January 01, 2012 at 9:31 AM
you have no power for RED, RED / BLACK,RED / WHITE
connect those 3 to a constant 12v source.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: January 01, 2012 at 9:54 AM
Apart from that obvious blooper was there an ACC II back then Ted?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: keanevann
Date Posted: January 01, 2012 at 12:24 PM
Thanks Ted..... I guess it helps to read the instructions right..... for some reason my brain saw input and thought that it needed to go to an input not that it was an input...blooper indeed
Posted By: shortcircuit161
Date Posted: January 01, 2012 at 1:06 PM
I agree with both Ted and Howie.
Directwire shows 2 Accessory wires for this year.
12volts white (40A or 50A)
Starter BLACK/ white
Ignition BLACK / YELLOW
Accessory BLACK/ red
2nd Accessory WHITE/ red
Also make sure you program the pink/white wire for 2nd Accessory in the Remote Starter features menu.
Good luck and please let us know how it worked out.
Posted By: tedmond
Date Posted: January 01, 2012 at 6:00 PM
when i installed a compustar into this car, i know i uesd the additional ignition wire but left it for acc 2.
the second acc is for Radio and Defrost. since you have a 5th relay output (ign2 pink/white) just use it anyways.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|