uncut key programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129975
Printed Date: July 03, 2025 at 3:47 AM

Topic: uncut key programming

Posted By: ziggyb222
Subject: uncut key programming
Date Posted: January 01, 2012 at 7:17 AM

Doing a 05 Mercury Mariner with a key in the box... it is New Years day and no where to get a key cut. I think I have seen ideas on programming the third key without cutting it to put it in the cylinder??? I cant seem to find any with a search... Any ideas would be great..Thanks in advance!!!!

Replies:

Posted By: mobileedgeny
Date Posted: January 01, 2012 at 8:17 AM

turn ign on with key 1 wait for theft light to go out, turn gin on with key 2 wait for theft light to go out, remove. remote start car with key in bypass module. car should start if positioned correctly. or can leave in the ignition cal to remote start car.

Print Page | Close Window