cm6200 plus dr1000 issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129990
Printed Date: July 04, 2025 at 1:46 PM

Topic: cm6200 plus dr1000 issues

Posted By: daveron
Subject: cm6200 plus dr1000 issues
Date Posted: January 02, 2012 at 1:21 AM

hey guys
i have a 98 chev pickup with a cm6200 remote starter
purchased a dr1000 from ebay and upon installation found that the idatalink bypass module is using the r232 data connector im not sure what to do here
i tried not using the data and hard wiring to pin 14 but it doesnt work for some reason im assuming it wants to use the dataline
any advice or info would be appreciated

Replies:

Posted By: tedmond
Date Posted: January 02, 2012 at 7:45 AM

hardwire or w2w the bypass to the cm6000 and d2d the drone.

or you can piggyback the d2d connector as well. the compustar will differentiate the drone and bypass even in you tap into the data line.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: daveron
Date Posted: January 02, 2012 at 9:43 AM

tedmond wrote:

hardwire or w2w the bypass to the cm6000 and d2d the drone.

or you can piggyback the d2d connector as well. the compustar will differentiate the drone and bypass even in you tap into the data line.

thanks for the response
so i can splice the dr1000 4 wire data into the bypass 4wire data connector and or wires and the cm 6200 will sort them out ?

Posted By: tedmond
Date Posted: January 02, 2012 at 10:02 AM

precisely.

we did one a while back to test and we never heard of any issues from the customer. he loves it on his is250, plus the install was quick and clutter free

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: daveron
Date Posted: January 02, 2012 at 1:55 PM

thanks Ted
works great
appreciate the help

Print Page | Close Window