2009 nissan quest, avital 4103
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130006
Printed Date: June 08, 2024 at 11:13 PM
Topic: 2009 nissan quest, avital 4103
Posted By: co_ne_dub
Subject: 2009 nissan quest, avital 4103
Date Posted: January 02, 2012 at 10:00 PM
What is needed for this vehicle to RS succesfully?
I am using an ADSALCA flashed to this van, I have replaced the bypass with another one to rule out a faulty bypass. It will start right up with a key in the ignition or if I hold it near the key barrel. The problem has to be with the bypass, do I need an RF loop of some sort?
Do i need a different bypass altogether? I have not had major issues with Nissan/Idatalink combos before.
Replies:
Posted By: tedmond
Date Posted: January 02, 2012 at 11:35 PM
never had issues with bypassing nissans. did you wire up the bypass/program it correct;y.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: co_ne_dub
Date Posted: January 03, 2012 at 7:44 AM
yep, same way I have programmed other nissans.
flashed through weblink5.0 @ idatalink website, wired w2w.
followed the guide and still no go...
Posted By: ropuma
Date Posted: January 03, 2012 at 8:48 AM
Use "EVO ALL" OR "EVO CAN" FROM FORTIN ELECTRONICS DONE IN 20 MINUTES.
|