d2d port, can it be split for 2 devices?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130116
Printed Date: May 16, 2025 at 11:36 AM
Topic: d2d port, can it be split for 2 devices?
Posted By: danmc85
Subject: d2d port, can it be split for 2 devices?
Date Posted: January 08, 2012 at 8:34 PM
I have a question for my friend, Dave, who needs help wiring up his keyless entry door locks to his remote starter in his 07 Infiniti FX35. I tried searching for this, but didn't come up with anything relevant.
His vehicle has a XK09 module as a bypass for the remote starter and it is connected to his Viper 5501 (4702V) via the D2D port.
I am going to have him pick up an XK02 module with the NISSDL firmware so we can use it for what it supports:
Arm Factory Security
Disarm Factory Security
Door Lock Control
Door Unlock
Trunk / Hatch Release
The question I have as I have never done a car that needed 2 different bypasses, can the D2D port be split with a Y type cable to allow both devices to communicate via D2D or do I have to use W2W to connect this module to his vehicle?
Thanks,
Dan
Replies:
Posted By: tedmond
Date Posted: January 08, 2012 at 10:38 PM
i know on compustar you can split the d2d and not have issues, cant speak for the viper unit.
using a fortin EVO-all, evo-can will make your life easier than the xk09/02.
the fortin is an all in one solution. If you prefer directed products the DB-ALL or iDatalink ADS-AL-CA
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: danmc85
Date Posted: January 08, 2012 at 11:05 PM
tedmond wrote:
i know on compustar you can split the d2d and not have issues, cant speak for the viper unit.
using a fortin EVO-all, evo-can will make your life easier than the xk09/02.
the fortin is an all in one solution. If you prefer directed products the DB-ALL or iDatalink ADS-AL-CA
Thanks,
I think I found the answer to my question...
https://www.xpresskit.com/product.aspx?productid=424
- Dan
|