Print Page | Close Window

viper 5202 manual transmission mode

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130117
Printed Date: April 29, 2024 at 12:06 PM


Topic: viper 5202 manual transmission mode

Posted By: pbmgto
Subject: viper 5202 manual transmission mode
Date Posted: January 08, 2012 at 8:37 PM

I recently install a Viper 5202 on my 2004 Pontiac GTO. After the install was complete I tried to enable manual transmission mode/turbo timer. After following the instructions in the manual I could not get the parking lights to flash 5 times indicating manual transmission mode. I have the neutral safety switch input is grounded, neutral safety switch in the on position, door trigger works, and parking lights flash when armed and disarmed. Any suggestions?



Replies:

Posted By: tedmond
Date Posted: January 08, 2012 at 10:36 PM
is the unit in manual mode? section 3, option 1, mode 1.

are you pulling ebrake, release foot brake, press start, open/close door, press lock? thats proper reservation mode.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: the_flash
Date Posted: January 09, 2012 at 9:52 AM

When you say you have the NSS wire grounded, Does that mean you tied it in with the brains ground connection? If so that is your issue. In Manual mode it cannot be a constant ground, The NSS wire needs to be pulsed from engaging the Emergency Brake.





Posted By: tedmond
Date Posted: January 09, 2012 at 11:56 AM
x2

if the vehicle is manual, cut the NSS wire BLACK/ white and connect to ebrake, not permanent ground

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: pbmgto
Date Posted: January 09, 2012 at 6:13 PM
Sweet. That should be my issue. Thanks guys. If this doesn't solve my problem I'll let you know.





Print Page | Close Window