2006 chevy hhr remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130141
Printed Date: May 12, 2025 at 8:19 PM

Topic: 2006 chevy hhr remote start

Posted By: lucasoil4u
Subject: 2006 chevy hhr remote start
Date Posted: January 10, 2012 at 11:23 AM

Putting in a Remote start on a 2006 HHR Wondering if anyone has a wiring diagram and if anyone knows which wire the bcm data line is at the bcm for the bypass. dlpkgm. Thanks

Replies:

Posted By: offroadzj
Date Posted: January 10, 2012 at 12:10 PM

Wire Diagram

As for the bypass, you'd be better off going with just the DLPK. It will control more than the DLPKGM (according to xpresskit.com) and will make the install a ton easier. The mux circuit can be a royal PITA to wire up manually. The DLPK will take care of the mux circuit, the immobilizer, locks, etc all through data. The DLPKGM will ONLY control the locks... so you will have to get an immobilizer bypass as well.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Posted By: lucasoil4u
Date Posted: January 16, 2012 at 8:01 AM

what wire is the bcm data wire is what i am trying to figure out? I will be doing this remote starter next week. Thanks
Ryan

Posted By: kreg357
Date Posted: January 16, 2012 at 8:40 AM

The Data wire at the BCM is in connector C2 ( top plug of BCM ). It is a Tan/White wire at Pin 12.

As Kenny pointed out, the DLPKGM will not do the transponder bypass function, only the door locks.

-------------
Soldering is fun!

Posted By: lucasoil4u
Date Posted: January 17, 2012 at 9:04 AM

I am using the dlpk. Thanks a bunch guys