Print Page | Close Window

toyota tacoma door lock wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130159
Printed Date: May 14, 2024 at 7:41 AM


Topic: toyota tacoma door lock wiring

Posted By: gpcrx
Subject: toyota tacoma door lock wiring
Date Posted: January 11, 2012 at 5:51 PM

2008 Tacoma with a Viper 350 alarm,

I am trying to find out if when wiring a Viper 350 into a 2008 Toyota Tacoma if the lock/unlock wiring requires diodes?

Thanks



Replies:

Posted By: blkrhyno
Date Posted: January 11, 2012 at 6:05 PM
No diodes needed, unlock requires double pulse.

-------------
Protect what's yours.



Posted By: tedmond
Date Posted: January 11, 2012 at 6:09 PM
no diodes just straight connection to car.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: offroadzj
Date Posted: January 11, 2012 at 7:19 PM
Make sure that if you connect the factory disarm that the unit is programmed to disarm on unlock (not just remote start). Otherwise it will not unlock the doors correctly. It will also require double pulse to unlock through the factory disarm wire.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205


Print Page | Close Window