2002 nissan frontier
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130167
Printed Date: May 15, 2024 at 11:39 AM
Topic: 2002 nissan frontier
Posted By: rlowe75
Subject: 2002 nissan frontier
Date Posted: January 12, 2012 at 11:09 AM
It's been awhile since I have installed a remote start. I got out of the business about 5 years ago. Anyways I ordered a Python 4102 and was looking through the wiring diagram and to be honest with you not for sure of some of the connections. Anyways the install guide talks about "Flex Relays". Any idea what these are? Also H1/10 WHITE/ BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT This input comes from the factory set to 1 activation pulse. This means that it is necessary to have a single ground pulse on the WHITE/ blue wire for the remote start to activate or to deactivate Should this be grounded or is this just another signal for the remote start via momentery switch?
Thanks for the help!!
-------------
It's all fun and games till someone looses an eye.
Replies:
Posted By: tedmond
Date Posted: January 12, 2012 at 11:36 AM
flex relay is for an addition acc,ign or start of your choice if you need it. in this case all nissans will have a second start wire.
the WHITE/ blue is optional if you were to connect it a switch, or activation through factory remotes by tapping onto the door lock wire. pretty much what you suspected it to be, just another signal to activate start. DO not ground this wire.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: sparkyssb
Date Posted: January 12, 2012 at 11:37 AM
Pretty sure the flex relays are relays built into the unit so you don't have to provide them yourself. (such as parking lamp control) The H1/10 WHITE/ BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT can be left disconnected. Do not ground it. This is to turn on the remote start via a single pulse (ex, using a factory remote with an aux channel) or to activate the turbo timer.
Posted By: rlowe75
Date Posted: January 12, 2012 at 11:42 AM
Since this truck as 2nd ignition do I need to relay it?
-------------
It's all fun and games till someone looses an eye.
Posted By: tedmond
Date Posted: January 12, 2012 at 12:18 PM
from the looks of this vehicle, it only has a second starter wire. only one acc and ignition.
make sure you program that flex relay output for start.
easy vehicle to do.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|