viper remote fault tones, ’11 silverado
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130176
Printed Date: May 05, 2025 at 10:16 PM
Topic: viper remote fault tones, ’11 silverado
Posted By: flyboy12
Subject: viper remote fault tones, ’11 silverado
Date Posted: January 12, 2012 at 4:52 PM
I have a Viper 5701 installed with a DBALL module on my '11 silverado.
Recently my remote will give a fault tone and the Arm and Function LEDs light up about 5 seconds after i arm/lock the system. the doors lock and the lights flash as normal.
Heres the annoying thing: if i unlock/disarm the system within about 5-10minutes after arming, the OEM alarm goes off! at that point the only way to get in is to use the actual key into the door, the remote wont unlock the doors!
Any Ideas? Ive searched and found nothing...
Replies:
Posted By: flyboy12
Date Posted: January 16, 2012 at 12:31 PM
any ideas anyone??
Posted By: offroadzj
Date Posted: January 16, 2012 at 12:51 PM
How do you have everything wired. Is it D2D or W2W? If D2D, then you may want to try changing everything out to W2W and connecting the factory arm/disarm outputs to the lock/unlock inputs of the DB-ALL
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|